Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Montgomery County · Maryland

Chimney Flashing Repair in Somerset

Ask a Somerset homeowner when their flue was last scanned with a camera and most cannot say. That gap is exactly where chimney fires and carbon-monoxide leaks come from. For Somerset homeowners, chimney Flashing Repair runs on our regular Montgomery County route — Somerset is about 12 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. The housing here — early suburban colonials in a small incorporated town — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20815
  • 24/7 Emergency
Chimney Flashing Repair in Somerset, MD — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in Somerset · Montgomery County

About Chimney Flashing Repair in Somerset

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

Somerset at a Glance

County: Montgomery County

State: Maryland

ZIPs served: 20815

Distance: about 12 miles from our Beltsville headquarters

Homes: early suburban colonials in a small incorporated town

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in Somerset

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

Local reality: chimneys in Somerset: Crowns fail first — and quietly

The concrete crown is the chimney's roof, and across Montgomery County it is the part that fails first: poured thin, cracked by freeze-thaw, it funnels water straight into the brick core below. By the time white efflorescence or spalling shows on the Somerset chimney's face, the crown has usually been leaking for seasons. We rebuild crowns with a proper overhang and drip edge, or seal sound ones with a flexible crown coat — matched to what the inspection actually finds. It is one of the first things our sweeps check on any Montgomery County call, new customer or regular.

Booked work comes with photo documentation as standard: the flue on camera, the cap and crown from the roof, and the findings written down where you can keep them.

FAQ

Chimney Flashing Repair Questions in Somerset

Is my leak definitely the flashing?
Not always — crowns and porous masonry mimic flashing leaks. We diagnose first and show you the evidence before quoting.
Do you work with my roofer?
Yes. We handle the chimney side; if shingles beyond the flashing need work we say so plainly and coordinate.
How fast can a crew reach Somerset for chimney Flashing Repair?
Somerset is about 12 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. Regular appointments are batched into Montgomery County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Can you waterproof my chimney without changing how it looks?
Yes. We use vapor-permeable ChimneySaver waterproofing, which keeps liquid water out while letting the brick breathe — and it is invisible once cured, unlike film-forming sealers that blister and trap moisture. It is applied after any needed repointing, on sound brick across Montgomery County.

Chimney Flashing Repair in Nearby Communities

Route days in Somerset rarely end at the town line: the same truck usually continues to Friendship Heights (ZIP 20815), Martins Additions and Chevy Chase before heading back to Beltsville — so chimney Flashing Repair in Somerset batches with the rest of the Montgomery County run, and same-week appointments stay possible here even in October.

More Chimney Services in Somerset

See the full chimney service in Somerset page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in Somerset — Booked in One Call

Photo-documented work and upfront written estimates, about 12 miles from our Beltsville headquarters. Talk to a chimney specialist today.