Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
District of Columbia · Washington, DC

Chimney Flashing Repair in Palisades

Ask a Palisades homeowner when their flue was last scanned with a camera and most cannot say. That gap is exactly where chimney fires and carbon-monoxide leaks come from. For Palisades homeowners, chimney Flashing Repair runs on our regular District of Columbia route — Palisades is about 13 miles from our Beltsville headquarters — typically a 35-minute drive in normal traffic. The housing here — historic housing stock from Georgetown to Capitol Hill — around MacArthur Boulevard — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20016
  • 24/7 Emergency
Chimney Flashing Repair in Palisades, DC — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in Palisades · District of Columbia

About Chimney Flashing Repair in Palisades

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

Palisades at a Glance

County: District of Columbia

State: Washington, DC

ZIPs served: 20016

Distance: about 13 miles from our Beltsville headquarters

Homes: historic housing stock from Georgetown to Capitol Hill

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

A few details here and dispatch calls back to confirm your slot. Rather talk it through? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in Palisades

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

What we watch for in Palisades: Gas logs still need the flue

Plenty of Palisades fireplaces were converted to gas over the years, and the flue above them was simply forgotten. Gas exhaust is cooler and wetter than wood smoke — it condenses inside clay liners, eats mortar from the inside, and carries carbon monoxide that must never find a crack to leak through. Converted systems need inspection like any other, and ventless or vented questions are ones we answer with the appliance manual and a CO meter, not opinions. Insurance files and home-sale paperwork both go smoother with that photo record attached.

The visit is also a chance to ask anything — burning habits, wood storage, damper quirks. Our sweeps would rather teach for five minutes than return for a preventable problem.

FAQ

Chimney Flashing Repair Questions in Palisades

How long does flashing last?
Properly installed metal flashing lasts decades — typically as long as the roof around it.
Why did the last flashing repair fail?
Surface patches — tar, caulk, roof cement — cannot move with the roof and chimney. They crack, and the leak resumes. Proper flashing is mechanical, not glued on.
How fast can a crew reach Palisades for chimney Flashing Repair?
Palisades is about 13 miles from our Beltsville headquarters — typically a 35-minute drive in normal traffic. Regular appointments are batched into District of Columbia route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
What areas around Palisades do you also cover?
Our District of Columbia routes cover the communities listed at the bottom of this page and the full map on the locations page — every community page shows its own ZIPs and distance from our Beltsville shop.

Chimney Flashing Repair in Nearby Communities

Route days in Palisades rarely end at the town line: the same truck usually continues to Tenleytown (ZIP 20016), Spring Valley and Georgetown before heading back to Beltsville — so chimney Flashing Repair in Palisades batches with the rest of the District of Columbia run, and same-week appointments stay possible here even in October.

More Chimney Services in Palisades

See the full chimney service in Palisades page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in Palisades — Booked in One Call

Photo-documented work and upfront written estimates, about 13 miles from our Beltsville headquarters. Talk to a chimney specialist today.