Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Montgomery County · Maryland

Chimney Chase Cover Installation in Martins Additions

Winter in Martins Additions means wood smoke over the rooftops — and a long list of flues that have not been swept since the house last changed hands. For Martins Additions homeowners, chimney Chase Cover Installation runs on our regular Montgomery County route — Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. The housing here — early-1900s colonials and cottages in a historic village enclave — shapes what our crews check first and what they carry on the truck.

On a prefabricated chimney, the chase cover is the roof: a metal pan that sheds every drop of rain off the wooden chase. The galvanized covers installed with most prefab systems rust through in years, streaking the siding and soaking the chase. We measure, fabricate and install stainless steel and custom chase covers that end the cycle.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20815
  • 24/7 Emergency
Chimney Chase Cover Installation in Martins Additions, MD — Prefabricated chimney chase with a metal chase cover on a Maryland rooftop
Chimney Chase Cover InstallationNow booking in Martins Additions · Montgomery County

About Chimney Chase Cover Installation in Martins Additions

A failing chase cover announces itself with rust streaks down the chase, water stains on the ceiling below, and eventually a rotted chase top and framing. Our replacements are measured on the roof — chase dimensions, flue collar height, pitch — and fabricated with a slight crown so water runs off instead of pooling, in stainless that will not rust through like the original galvanized pan. Storm-damaged, leaking and rusted covers are replaced whole; sealing over a rusted-through cover is a patch we will talk you out of.

What's Included

  • Stainless steel chase cover fabrication and installation
  • Custom chase covers for oversized and multi-flue chases
  • Rusted and leaking cover replacement
  • Chase top inspection with every cover job
  • Cover sealing and waterproofing at the collar

Martins Additions at a Glance

County: Montgomery County

State: Maryland

ZIPs served: 20815

Distance: about 11 miles from our Beltsville headquarters

Homes: early-1900s colonials and cottages in a historic village enclave

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Chase Cover Installation Process in Martins Additions

1

Inspect

The cover, chase top and collar are checked for rust-through, pooling and water damage.

2

Measure

Chase dimensions and collar details are measured on the roof for fabrication.

3

Fabricate & fit

The new cover is made with a water-shedding crown and fitted over the chase.

4

Seal & verify

Collars are sealed, fasteners checked, and the finished cover is photographed for your file.

Local Chimney Notes

What we watch for in Martins Additions: Heavy burners glaze flues faster

Plenty of Martins Additions households burn several nights a week once the cold sets in, and steady burning lays down creosote faster than the once-a-season fire people picture. By the second or third season that layer can glaze — the hard, shiny stage that brushes alone cannot fully remove and the stage most likely to ignite. Our Montgomery County sweeps read the deposit before choosing tools, and the camera scan afterwards shows exactly what came off the flue walls. It is also the kind of problem that gets cheaper the earlier it is caught.

Every visit ends the same way: photos of your flue before and after, findings in plain language, and one exact written price for anything beyond the booked work — no surprises on the ladder.

FAQ

Chimney Chase Cover Installation Questions in Martins Additions

Why stainless instead of galvanized?
Galvanized covers are the original equipment on most prefab chimneys — and the rust streaks on your siding are their service life ending. Stainless costs more once and does not repeat the cycle.
Can a leaking chase cover just be sealed?
Surface rust with sound metal underneath, sometimes. A cover that is rusted through or pooling water needs replacement — sealant over perforation is a short reprieve, and we will show you the photos so you can judge.
How fast can a crew reach Martins Additions for chimney Chase Cover Installation?
Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. Regular appointments are batched into Montgomery County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Do you service gas fireplaces and log sets?
Yes — gas fireplaces, log sets and the flues above them. Gas systems still need their venting scanned and their caps checked; cooler gas exhaust condenses inside clay liners. If your Martins Additions system was converted from wood, the flue deserves one camera scan to establish its real condition.

Chimney Chase Cover Installation in Nearby Communities

Route days in Martins Additions rarely end at the town line: the same truck usually continues to Somerset (ZIP 20815), Friendship Heights and Chevy Chase before heading back to Beltsville — so chimney Chase Cover Installation in Martins Additions batches with the rest of the Montgomery County run, and same-week appointments stay possible here even in October.

More Chimney Services in Martins Additions

See the full chimney service in Martins Additions page for this community's own notes, seasons and reviews.

Chimney Chase Cover Installation in Martins Additions — Booked in One Call

Photo-documented work and upfront written estimates, about 11 miles from our Beltsville headquarters. Talk to a chimney specialist today.