Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Anne Arundel County · Maryland

ChimneySaver Waterproofing in Annapolis

A chimney in Annapolis works behind the walls for decades — until the season it doesn't, and the smoke, smell or stain shows up all at once. For Annapolis homeowners, chimneySaver Waterproofing runs on our regular Anne Arundel County route — Annapolis is about 19 miles from our Beltsville headquarters — typically a 45-minute drive in normal traffic. The housing here — colonials, ranches and waterfront homes — shapes what our crews check first and what they carry on the truck.

ChimneySaver is the water repellent the chimney industry reaches for first: a siloxane-based, vapor-permeable treatment made specifically for masonry chimneys — not adapted from concrete sealers. We are Maryland applicators for both the solvent- and water-based ChimneySaver lines.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 21401, 21403, 21402…
  • 24/7 Emergency
ChimneySaver Waterproofing in Annapolis, MD — Stone farmhouse chimney protected with ChimneySaver waterproofing in Maryland
ChimneySaver WaterproofingNow booking in Annapolis · Anne Arundel County

About ChimneySaver Waterproofing in Annapolis

ChimneySaver penetrates the surface and lines the pores of the brick, so rain beads off while interior moisture vapor escapes freely — the wall stays dry without being sealed shut. It is the correct finish after repointing, crown work or a rebuild, and the standing defense for sound chimneys facing their next decade of Maryland winters. The manufacturer backs it for 10 years.

What's Included

  • Genuine ChimneySaver product, chimney-specific formula
  • 100% vapor-permeable — the wall keeps breathing
  • 10-year manufacturer warranty
  • Invisible finish, no color or sheen change
  • Applied to refusal after surface preparation

Annapolis at a Glance

County: Anne Arundel County

State: Maryland

ZIPs served: 21401, 21403, 21402, 21404, 21405, 21409

Distance: about 19 miles from our Beltsville headquarters

Homes: colonials, ranches and waterfront homes

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our ChimneySaver Waterproofing Process in Annapolis

1

Sound-wall check

Mortar and brick are verified ready — repairs come first if needed.

2

Prep & mask

Roofing, siding and plantings around the stack are protected.

3

Flood application

ChimneySaver is applied in flood coats until the masonry refuses more.

4

Warranty

You receive the product and warranty documentation for your records.

Local Chimney Notes

Local reality: chimneys in Annapolis: Water is the enemy number one here

Between Chesapeake humidity, driving rain and freeze-thaw winters, Annapolis chimneys fight water on every face: crowns crack at the wash, flashing tires where it meets the roofline, and porous brick drinks storm after storm. The stains show up inside — a ceiling spot two rooms away, a rusted damper, a musty firebox. We trace leaks to their actual entry point before recommending anything, because sealing the wrong joint just moves the water. Insurance files and home-sale paperwork both go smoother with that photo record attached.

And because this is all we do, the truck that rolls into Annapolis carries chimney tools, chimney parts and chimney answers — nothing borrowed from another trade.

FAQ

ChimneySaver Waterproofing Questions in Annapolis

How is ChimneySaver different from other repellents?
It was formulated for chimneys: vapor-permeable, non-film-forming, and tested on masonry that cycles hot and cold — unlike concrete sealers resold for brick.
Can it go over old sealer?
Film-forming coatings must come off first; ChimneySaver needs bare, absorbent masonry to penetrate. We test the surface during the estimate.
How fast can a crew reach Annapolis for chimneySaver Waterproofing?
Annapolis is about 19 miles from our Beltsville headquarters — typically a 45-minute drive in normal traffic. Regular appointments are batched into Anne Arundel County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Can you waterproof my chimney without changing how it looks?
Yes. We use vapor-permeable ChimneySaver waterproofing, which keeps liquid water out while letting the brick breathe — and it is invisible once cured, unlike film-forming sealers that blister and trap moisture. It is applied after any needed repointing, on sound brick across Anne Arundel County.

ChimneySaver Waterproofing in Nearby Communities

Route days in Annapolis rarely end at the town line: the same truck usually continues to Riva (ZIP 21140), Crownsville and Edgewater before heading back to Beltsville — so chimneySaver Waterproofing in Annapolis batches with the rest of the Anne Arundel County run, and same-week appointments stay possible here even in October.

More Chimney Services in Annapolis

See the full chimney service in Annapolis page for this community's own notes, seasons and reviews.

ChimneySaver Waterproofing in Annapolis — Booked in One Call

Photo-documented work and upfront written estimates, about 19 miles from our Beltsville headquarters. Talk to a chimney specialist today.