Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Anne Arundel County · Maryland

Chimney Flashing Repair in Annapolis

Ask a Annapolis homeowner when their flue was last scanned with a camera and most cannot say. That gap is exactly where chimney fires and carbon-monoxide leaks come from. For Annapolis homeowners, chimney Flashing Repair runs on our regular Anne Arundel County route — Annapolis is about 19 miles from our Beltsville headquarters — typically a 45-minute drive in normal traffic. The housing here — colonials, ranches and waterfront homes — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 21401, 21403, 21402…
  • 24/7 Emergency
Chimney Flashing Repair in Annapolis, MD — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in Annapolis · Anne Arundel County

About Chimney Flashing Repair in Annapolis

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

Annapolis at a Glance

County: Anne Arundel County

State: Maryland

ZIPs served: 21401, 21403, 21402, 21404, 21405, 21409

Distance: about 19 miles from our Beltsville headquarters

Homes: colonials, ranches and waterfront homes

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in Annapolis

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

Why Annapolis chimneys keep us busy: Water is the enemy number one here

Between Chesapeake humidity, driving rain and freeze-thaw winters, Annapolis chimneys fight water on every face: crowns crack at the wash, flashing tires where it meets the roofline, and porous brick drinks storm after storm. The stains show up inside — a ceiling spot two rooms away, a rusted damper, a musty firebox. We trace leaks to their actual entry point before recommending anything, because sealing the wrong joint just moves the water. Homeowners see the same footage we do, on the spot, before any quote is written.

One more thing Annapolis customers get on every ticket: a named technician, an arrival window we keep, and a written record of the work — the same standard on a cap install as on a full relining.

FAQ

Chimney Flashing Repair Questions in Annapolis

How long does flashing last?
Properly installed metal flashing lasts decades — typically as long as the roof around it.
Why did the last flashing repair fail?
Surface patches — tar, caulk, roof cement — cannot move with the roof and chimney. They crack, and the leak resumes. Proper flashing is mechanical, not glued on.
How fast can a crew reach Annapolis for chimney Flashing Repair?
Annapolis is about 19 miles from our Beltsville headquarters — typically a 45-minute drive in normal traffic. Regular appointments are batched into Anne Arundel County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Can you waterproof my chimney without changing how it looks?
Yes. We use vapor-permeable ChimneySaver waterproofing, which keeps liquid water out while letting the brick breathe — and it is invisible once cured, unlike film-forming sealers that blister and trap moisture. It is applied after any needed repointing, on sound brick across Anne Arundel County.

Chimney Flashing Repair in Nearby Communities

Route days in Annapolis rarely end at the town line: the same truck usually continues to Riva (ZIP 21140), Crownsville and Edgewater before heading back to Beltsville — so chimney Flashing Repair in Annapolis batches with the rest of the Anne Arundel County run, and same-week appointments stay possible here even in October.

More Chimney Services in Annapolis

See the full chimney service in Annapolis page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in Annapolis — Booked in One Call

Photo-documented work and upfront written estimates, about 19 miles from our Beltsville headquarters. Talk to a chimney specialist today.