Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Prince George's County · Maryland

Chimney Flashing Repair in Temple Hills

A chimney in Temple Hills works behind the walls for decades — until the season it doesn't, and the smoke, smell or stain shows up all at once. For Temple Hills homeowners, chimney Flashing Repair runs on our regular Prince George's County route — Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. The housing here — brick colonials, split-levels and garden communities — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20748
  • 24/7 Emergency
Chimney Flashing Repair in Temple Hills, MD — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in Temple Hills · Prince George's County

About Chimney Flashing Repair in Temple Hills

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

Temple Hills at a Glance

County: Prince George's County

State: Maryland

ZIPs served: 20748

Distance: about 16 miles from our Beltsville headquarters

Homes: brick colonials, split-levels and garden communities

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

A few details here and dispatch calls back to confirm your slot. Rather talk it through? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in Temple Hills

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

The Temple Hills pattern we see most: Older masonry needs a gentler hand

The older stacks in Temple Hills were laid with softer brick and lime-rich mortar, and they punish modern shortcuts: hard Portland-heavy repointing traps moisture and spalls the faces, and aggressive grinding scars joints that have survived a century. Our masons match mortar to the original, cut joints by hand where the brick demands it, and stage waterproofing only after repairs cure — the slow way, because it is the way that lasts. It is also the kind of problem that gets cheaper the earlier it is caught.

One more thing Temple Hills customers get on every ticket: a named technician, an arrival window we keep, and a written record of the work — the same standard on a cap install as on a full relining.

FAQ

Chimney Flashing Repair Questions in Temple Hills

Do you work with my roofer?
Yes. We handle the chimney side; if shingles beyond the flashing need work we say so plainly and coordinate.
How long does flashing last?
Properly installed metal flashing lasts decades — typically as long as the roof around it.
How fast can a crew reach Temple Hills for chimney Flashing Repair?
Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. Regular appointments are batched into Prince George's County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
When is the best time of year to book in Temple Hills?
Late summer is the smart window across Prince George's County: schedules are open, masonry repairs can cure before the cold, and you are not competing with the October rush. Emergency and safety work runs year-round — a cracked liner or a blocked flue should never wait for a convenient season.

Chimney Flashing Repair in Nearby Communities

Route days in Temple Hills rarely end at the town line: the same truck usually continues to Camp Springs (ZIP 20748), Suitland and Hillcrest before heading back to Beltsville — so chimney Flashing Repair in Temple Hills batches with the rest of the Prince George's County run, and same-week appointments stay possible here even in October.

More Chimney Services in Temple Hills

See the full chimney service in Temple Hills page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in Temple Hills — Booked in One Call

Photo-documented work and upfront written estimates, about 16 miles from our Beltsville headquarters. Talk to a chimney specialist today.