Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Howard County · Maryland

Chimney Flashing Repair in Fulton

Ask a Fulton homeowner when their flue was last scanned with a camera and most cannot say. That gap is exactly where chimney fires and carbon-monoxide leaks come from. For Fulton homeowners, chimney Flashing Repair runs on our regular Howard County route — Fulton is about 7 miles from our Beltsville headquarters — typically a 20-minute drive in normal traffic. The housing here — planned-community colonials and townhomes — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20759
  • 24/7 Emergency
Chimney Flashing Repair in Fulton, MD — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in Fulton · Howard County

About Chimney Flashing Repair in Fulton

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

Fulton at a Glance

County: Howard County

State: Maryland

ZIPs served: 20759

Distance: about 7 miles from our Beltsville headquarters

Homes: planned-community colonials and townhomes

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in Fulton

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

Local reality: chimneys in Fulton: Uncapped flues invite the neighborhood wildlife

An open flue in Fulton is an engraved invitation: chimney swifts in spring, squirrels and raccoons through the fall, and rain in every season. Nests block draft, animals die in flues, and water starts its slow work on the smoke shelf and damper. A stainless cap with a proper screen ends all three problems at once — it is the cheapest insurance a Howard County chimney can carry, and we check cap condition on every visit. It is also the kind of problem that gets cheaper the earlier it is caught.

Every visit ends the same way: photos of your flue before and after, findings in plain language, and one exact written price for anything beyond the booked work — no surprises on the ladder.

FAQ

Chimney Flashing Repair Questions in Fulton

How long does flashing last?
Properly installed metal flashing lasts decades — typically as long as the roof around it.
Why did the last flashing repair fail?
Surface patches — tar, caulk, roof cement — cannot move with the roof and chimney. They crack, and the leak resumes. Proper flashing is mechanical, not glued on.
How fast can a crew reach Fulton for chimney Flashing Repair?
Fulton is about 7 miles from our Beltsville headquarters — typically a 20-minute drive in normal traffic. Regular appointments are batched into Howard County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Do you clean dryer vents while you are here?
Yes — dryer vent cleaning rides on the same truck, and Fulton customers often pair it with the sweep: same visit, same drop cloths, one invoice. A clogged dryer vent is a fire risk of its own and the lint load in Howard County homes is usually worse than owners expect.

Chimney Flashing Repair in Nearby Communities

Route days in Fulton rarely end at the town line: the same truck usually continues to Highland (ZIP 20777), Burtonsville and North Laurel before heading back to Beltsville — so chimney Flashing Repair in Fulton batches with the rest of the Howard County run, and same-week appointments stay possible here even in October.

More Chimney Services in Fulton

See the full chimney service in Fulton page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in Fulton — Booked in One Call

Photo-documented work and upfront written estimates, about 7 miles from our Beltsville headquarters. Talk to a chimney specialist today.